Category Archives: Build Threads

A flying … me? RCFlyGuy build thread

In the quest for something a little different, I came upon these Depron kits from Hoosier Cutout Service. You can download plans for free and cut your own, but I opted for the laser cut kit to save me all … Continue reading

Posted in Build Threads, Building, Custom & Modified, R/C Planes | Leave a comment

“Bipie” build thread

Based on the “Bipie” plans from RCGroups, this little guy will have an 18″ wingspan and be built from a single sheet of Dollar Tree foam board. I’m hoping to use the guts from an E-flite UMX Gee Bee to … Continue reading

Posted in Biplanes & Triplanes, Build Threads, Building, Custom & Modified, Scratch Built | 1 Comment

Snowdragon – Coroplast / fanfold KF hybrid build

A friend of mine ran for Senate this year (and almost won!) I collected a few yard signs at the end of his campaign with the idea of building something out of them. I thought about a Nutball or a Funbat, but … Continue reading

Posted in Build Threads, Building, Custom & Modified, Flying Wings, R/C Planes | 1 Comment

The Arlene Turner Memorial Moth build

The GWS Tiger Moth 400 was the first plane I built. My original Moth still flies and looks great, but I’ve decided to give it another go and see if two years of building and flying experience can’t produce an … Continue reading

Posted in Biplanes & Triplanes, Build Threads, Building, Custom & Modified | 1 Comment

Building an FPV setup

I’ve wanted to do FPV since before I even got into RC so, when I won some money at a local casino, I invested it in the following equipment: 600TVL SONY SUPER HAD CCD Camera Bluebeam Whip antenna set FatShark … Continue reading

Posted in Build Threads, Building, FPV | Leave a comment

Twin Funbat Build

I am building recently finished a matched pair of combat planes, based on the Funbat plans from Bloody Mick’s. I made a silly mistake with the first plane, cutting the wing way too long. I had to excise a section to … Continue reading

Posted in Build Threads, Building, Combat, Custom & Modified, R/C Planes, Scratch Built | 1 Comment

Sporty Little Plane – Build Thread

Yet another build, this one a little low-wing sports plane with a 25″ wingspan, made from blue Dow fanfold foam. You’ll find the plane’s official page, here. My first successful scratch build was another Tiger Moth. That was followed by … Continue reading

Posted in Build Threads, Building, Custom & Modified, R/C Planes, Scratch Built | Comments Off on Sporty Little Plane – Build Thread

Blu-Baby Build

My niece has expressed interest in building an R/C airplane, and we’ve chosen the Blu-Baby as her first build. Update: On our first test flight, the main wing showed an alarming tendancy to bend upwards under load, so the first … Continue reading

Posted in Build Threads, Building, Custom & Modified, R/C Planes, Scratch Built | 2 Comments

Nutball build thread (RETIRED)

After suffering a catastrophic de-lamination when moisture and humidity caused the paper to separate from the foam, this plane has been retired. I’ve convinced my wife to build a plane and she’s chosen a nutball, which she plans to decorate … Continue reading

Posted in Build Threads, Building, Custom & Modified, R/C Planes, Retired, Scratch Built | 1 Comment

Pico Tiger Moth Build

I love biplanes, especially Tiger Moths. This is my 3rd Tiger Moth build. This one is from a GWS Pico Tiger Moth kit (slope glider version). I’m adding full-strip ailerons on both sets of wings, and planning on using a 1700kV … Continue reading

Posted in Biplanes & Triplanes, Build Threads, Building, Custom & Modified, My Planes, R/C Planes | 4 Comments

Hot Rod – Light Stryker build

I’m building a lightweight Stryker for my son-in-law. It’ll be his first plane; we’ll see how that goes. This one is along the lines of my other light Strykers – small Blue Wonder motor, 10A ESC, 2″ balsa elevons and … Continue reading

Posted in Build Threads, Building, Custom & Modified, R/C Planes | 1 Comment

P115 Flying Wing build

This is my P115 wing, hot wire cut from blue insulating foam by RCGroup’s papo. The wing showed up in two halves of slightly uneven dimension – a couple of inches of wing had to be removed to fit things … Continue reading

Posted in Build Threads, Building, Flying Wings, My Planes, R/C Planes, Scratch Built | 1 Comment