I am building recently finished a matched pair of combat planes, based on the Funbat plans from Bloody Mick’s.
I made a silly mistake with the first plane, cutting the wing way too long. I had to excise a section to preserve my leading edge – which takes advantage of the blue fanfold foam’s folds – and get everything back where it belonged.
Click the images for more detailed descriptions of each step.
Watch the maiden flight of the BlueBat, here.
You’ll find my Funbat’s official page here.
Planned setup:
- HURC 2712-17 ‘Blue Wonder’ motor
- GWS 7035 propeller
- Hobbyking SS 18-20A ESC
- (2x) HKSCM9-5 10 gram digital servos (ailerons)
- Hextronic XT900 9 gram servo (elevator)
- 3-cell 800 mAh LiPo battery
- Ready to go fly!
- ESC mounted atop the front of the fuse.
- Electronics installed and fuse glued to wing
- Testing the electronics.
- Motor mount installed on the firewall
- Firewall glued and taped in place
- 2712-17 motor and 18/20A ESC
- Two 2712-17 motors and plywood firewalls.
- I put another square of foam behind the firewall to cushion the battery in case of crash.
- Servos installed – bottom
- All three servos installed and linked up.
- Aileron servo hooked up
- Battery held in place with heavy-duty Velcro
- The battery mount (inside) is angled.
- Battery mount
- Fuselage supports in place
- Bracing the fuselage and firewall
- Airframes complete – tops
- Airframes complete – bottom
- Pink plane / blue tail
- The second plane gets a paint job.
- Slots cut out
- KFm step cut out
- Pink bottom cut out
- Starting the second plane.
- The blue airframe, completed.
- Note to self: razor knives are sharp.
- Test fitting the taped components.
- Gluing the second fin
- A pink fin for a blue plane.
- More blue (and black) tape.
- ‘Painting’ the plane blue with packing tape.
- Close-up: Taped front edge
- Tough tape on the leading edge
- Gluing the wings and spar together
- Wing spar channel
- The original fold but up against the newly shortened bottom of the wing.
- Section of the lower wing removed
- I screwed up, and had to re-cut the wing.
- The fuselage, covered in blue packing tape.
- Fuselage test fit
- The folded fuselage
- The inside of the fuselage is beveled and folded.
- Test fit
- The KFm airfoil.
- Ready to get started.
Pingback: [BLOCKED BY STBV] PinkBat & BlueBat, my matching combat planes. | Basement R/C