Categories
- Aerial Photography
- Balsa
- Biplanes & Triplanes
- Boats & Watercraft
- Build Threads
- Building
- Cars & Trucks
- Combat
- Crashes
- Custom & Modified
- Electric Ducted Fans (EDF)
- Equipment
- FAQs and Tips
- Flying
- Flying Wings
- FPV
- Gyros
- Lessons Learned
- My Fleet
- My Planes
- Night Flying
- R/C Helicopters & Quadcopters
- R/C Planes
- RC Chat
- Repairs
- Retired
- Scratch Built
- Uncategorized
-
Recent Posts
Tags
Building Aerial Photography My Fleet Night Flying FAQs and Tips Scratch Built R/C Planes Boats & Watercraft Electric Ducted Fans (EDF) R/C Helicopters & Quadcopters Balsa funbat My Planes Build Threads Repairs Custom & Modified Cars & Trucks Flying Wings Crashes RC Chat Biplanes & Triplanes Lessons Learned Gyros Flying Uncategorized Retired Equipment FPV Combat
Category Archives: My Planes
My Three Moths
Here are my three Tiger Moths: 38″ GWS Tiger Moth 400 (top, yellow); 32″ GWS Pico Tiger Moth (bottom right, red); 26″ scratch-built blue foam Tiger Moth (bottom left, blue).
Posted in Biplanes & Triplanes, Custom & Modified, My Planes, R/C Planes
1 Comment
Pico Tiger Moth Build
I love biplanes, especially Tiger Moths. This is my 3rd Tiger Moth build. This one is from a GWS Pico Tiger Moth kit (slope glider version). I’m adding full-strip ailerons on both sets of wings, and planning on using a 1700kV … Continue reading
Sopwith Triplane rebuild
After a disastrous maiden crash (see the horrifying video below), it was time to take the pieces apart and put them back together again. All three sets of wings were broken and the motor mount busted loose but, other than … Continue reading
UMX J-3 Cub mod – flying wires
Today while pulling some high-gee stunts, I managed to fold the port wing on my ultra-micro J-3 Cub. After gluing it back together, I decided to add some wing wires – inspired by my recent work on a scratch built … Continue reading
Posted in Custom & Modified, My Planes, R/C Planes
1 Comment
Mr. Angry Quad
During the family’s weekly pilgrimage to Freddy’s Frozen Custard, I spotted these lids and wondered if they might not make suitable alternate bodies for my mQX quadcopter.
The Frankenstick (RETIRED)
The last time I reorganized all my boxes of parts, I realized I had enough bits and pieces to put together a plane. Thus the Frankenstick was born. The wing is from an old HobbyZone Mini Super Cub. The fuselage … Continue reading
Posted in Custom & Modified, My Fleet, My Planes, R/C Planes, Retired, Scratch Built
Leave a comment
Blade mQX Quadcopter – simple onboard camera mount
One of the big attractions of the new Blade mQX quadcopter, to me, was its potential to carry my little keychain cameras around. I’m using the crudest of mounts – a piece of 3M Heavy Duty Fastener (e.g. Velcro) stuck … Continue reading